{"title":"Kingspan Kooltherm","description":"\u003ch2\u003eKingspan Kooltherm Insulation\u003c\/h2\u003e\u003cp\u003eThe Kingspan Kooltherm Insulation range is an extensive range of super high performance rigid thermoset phenolic insulation. Kooltherm Insulation is suitable for roofs, walls and floor areas in both residential and commercial applications. \u003ca href=\"\/pages\/pricewise-insulation-contact\"\u003eContact us\u003c\/a\u003e on \u003ca href=\"tel:1300729639\"\u003e1300 729 639\u003c\/a\u003e for commercial project pricing!\u003c\/p\u003e\u003ch2\u003eKooltherm Features\u003c\/h2\u003e\u003cp\u003e• Fibre-free, closed cell insulation core • Easy to handle and install • No CFC or HCFC used in manufacture • Has zero ODP and low GW • Water vapour resistant • Compliant with AS\/NZS 4859.1 • Made in Australia\u003c\/p\u003e\u003ch3\u003eKooltherm 10 Year Warranty\u003c\/h3\u003e\u003cp\u003eKingspan Kooltherm has an outstanding thermal performance, with a 14% increase in R-value performance than other PIR products. Kooltherm products can be expected to have a long life of service. Their durability depends on the supporting structure and the conditions of its use. Kooltherm insulation is covered by a 10 year warranty for both residential and commercial installations. This is subject to the terms of the Kingspan Kooltherm warranty document which is available upon request. This range includes some of the most thermally efficient insulation products on the Australian market. Contact us on \u003ca href=\"tel:1300729639\"\u003e1300 729 639\u003c\/a\u003e for commercial pricing!\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKooltherm Application and Handling\u003c\/h2\u003e\u003cp\u003eIt is considered best practice to tape joins of Kooltherm boards with 48 mm wide reinforced aluminium foil tape. When taping a plastic squeegee or blade must be used to apply appropriate pressure to the tape. Surfaces must be dry and free from dust, oil or grease prior to taping. Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side. Ensure accurate trimming to achieve close-butting joints and continuity of insulation. According to quantity, the boards are supplied in packs, labelled and shrink-wrapped in polythene.\u003c\/p\u003e\u003cp\u003eThe packaging of Kingspan Kooltherm® should not be considered adequate for long term outdoor protection. Ideally boards should be stored inside a building. If, however, outdoor storage cannot be avoided then the boards should be stacked clear of the ground and covered with an opaque polythene sheet or weatherproof tarpaulin. Boards that have been allowed to get wet should not be used.\u003c\/p\u003e\u003cp\u003e\u003cimg alt=\"Kingspan Kooltherm rigid board\" loading=\"lazy\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/files\/buy-kingspan-kooltherm-insulation-rigid-board.jpg?v=1788257365\"\u003e \u003cimg alt=\"Kingspan Kooltherm rigid board\" loading=\"lazy\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/files\/buy-kingspan-kooltherm-insulation-rigid-board-2.jpg?v=1788257362\"\u003e\u003c\/p\u003e","products":[{"product_id":"kingspan-kooltherm-k12-framing-board-insulation","title":"Kingspan Kooltherm K12 Framing Board Insulation","description":"\u003ch2\u003eK12 Framing Board For Commercial Use\u003c\/h2\u003e Kooltherm K12 Framing Board is a fibre-free rigid thermoset phenolic insulation, faced on both sides with foil adhesively bonded to the insulation core during manufacture. This reflective surface improves the thermal resistance of any cavity adjacent to the board. If correctly applied, Kooltherm® products can be expected to have a long life of service. Their durability depends on the supporting structure and the conditions of its use. Kingspan K12 is warranted for a period of 10 years for both residential and commercial installations, subject to the terms of the complete Kingspan Kooltherm® warranty document. \u003ch2\u003eConcrete Wall Installation (Clip\/Channel System)\u003c\/h2\u003e \u003col\u003e \t\u003cli\u003eInstall chosen furring channel clips at required spacing for plasterboard lining.\u003c\/li\u003e \t\u003cli\u003eFit Kooltherm over furring channel clips by pushing over the clips to abut the wall, and so that the wings of the clips penetrate the board. Care should be taken to avoid the foil facing of the insulation panels separating from the insulation core by neatly trimming the foil face at the point where the furring channel clip penetrates the insulation.\u003c\/li\u003e \t\u003cli\u003eButt join boards to provide a continuous insulation layer.\u003c\/li\u003e \t\u003cli\u003eInstall furring channels by clipping into channel clips. Furring channels should be tight against the face of the Kingspan Kooltherm®. Where furring channels are not tight to the insulation contact Kingspan Insulation Technical Service for further advice.\u003c\/li\u003e \t\u003cli\u003eInstall plasterboard lining.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eTaping, Cutting, Packaging, Storage and Handling\u003c\/h2\u003e It is considered best practice to tape joins of Kingspan Kooltherm® boards in this system with 48 mm wide reinforced aluminium foil tape. When taping a plastic squeegee or blade must be used to apply appropriate pressure to the tape. Surfaces must be dry and free from dust, oil or grease prior to taping. Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side. Ensure accurate trimming to achieve close-butting joints and continuity of insulation. According to quantity, the boards are supplied in packs, labelled and shrink-wrapped in polythene. The packaging of Kingspan Kooltherm® should not be considered adequate for long term outdoor protection. Ideally boards should be stored inside a building. If, however, outdoor storage cannot be avoided then the boards should be stacked clear of the ground and covered with an opaque polythene sheet or weatherproof tarpaulin. Boards that have been allowed to get wet should not be used. \u003ch2\u003eFeatures and Benefits of Kooltherm K12\u003c\/h2\u003e \u003cul\u003e \t\u003cli\u003eRigid thermoset phenolic insulation\u003c\/li\u003e \t\u003cli\u003eFibre-free, closed cell insulation core\u003c\/li\u003e \t\u003cli\u003eCan be used between studs or as an insulating sheathing\u003c\/li\u003e \t\u003cli\u003eSuitable for use with timber frame and steel frame wall constructions\u003c\/li\u003e \t\u003cli\u003eResistant to the passage of water vapour\u003c\/li\u003e \t\u003cli\u003eEasy to handle and install\u003c\/li\u003e \t\u003cli\u003eIdeal for new build or refurbishment\u003c\/li\u003e \t\u003cli\u003eGlobal GreenTag GreenRate-certificate\u003c\/li\u003e \t\u003cli\u003eCompliant with AS\/NZS 4859.1:2018\u003c\/li\u003e \t\u003cli\u003eCodeMark-certified for NCC compliance\u003c\/li\u003e \t\u003cli\u003eAustralian Made\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: center;\"\u003e\u003c\/p\u003e","brand":"Kingspan","offers":[{"title":"Victoria \/ 50 x 1200 x 2400 (6 boards)","offer_id":58071385211212,"sku":"PWV-K1250","price":1148.35,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 40 x 1200 x 2400 (8 boards)","offer_id":58071385243980,"sku":"PWV-K1240","price":1243.35,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 30 x 1200 x 2400 (10 boards)","offer_id":58071385276748,"sku":"PWV-K1230","price":1338.33,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 25 x 1200 x 2400 (12 boards)","offer_id":58071385309516,"sku":"PWV-K1225","price":1428.61,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 25 x 1200 x 2400 (12 boards)","offer_id":58071385342284,"sku":"PWN-K1225","price":1330.08,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 30 x 1200 x 2400 (10 boards)","offer_id":58071385375052,"sku":"PWN-K1230","price":1246.03,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 40 x 1200 x 2400 (8 boards)","offer_id":58071385407820,"sku":"PWN-K1240","price":1157.6,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 50 x 1200 x 2400 (6 boards)","offer_id":58071385440588,"sku":"PWN-K1250","price":1069.16,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 25 x 1200 x 2400 (12 boards)","offer_id":58071385473356,"sku":"PWQ-K1225","price":1664.4,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 30 x 1200 x 2400 (10 boards)","offer_id":58071385506124,"sku":"PWQ-K1230","price":1559.22,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 40 x 1200 x 2400 (8 boards)","offer_id":58071385538892,"sku":"PWQ-K1240","price":1448.55,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 50 x 1200 x 2400 (6 boards)","offer_id":58071385571660,"sku":"PWQ-K1250","price":1337.89,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 25 x 1200 x 2400 (12 boards)","offer_id":58071385604428,"sku":"PWA-K1225","price":1463.09,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 30 x 1200 x 2400 (10 boards)","offer_id":58071385637196,"sku":"PWA-K1230","price":1370.64,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 40 x 1200 x 2400 (8 boards)","offer_id":58071385669964,"sku":"PWA-K1240","price":1273.36,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 50 x 1200 x 2400 (6 boards)","offer_id":58071385702732,"sku":"PWA-K1250","price":1176.07,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/files\/edd60d6b-kingspan-kooltherm-k12-framing-board.jpg?v=1783940132"},{"product_id":"kingspan-kooltherm-k17-insulated-plasterboard","title":"Kingspan Kooltherm K17 Insulated Plasterboard","description":"\u003ch2\u003eKingspan Kooltherm K17 - Insulated Plasterboard\u003c\/h2\u003e Kingspan Kooltherm K17 Insulated Plasterboard is a fibre-free rigid thermoset, closed cell phenolic insulation, sandwiched between a front facing of tapered edge gypsum based plasterboard, and a reverse tissue based facing adhesively bonded to the insulation core during manufacture. Kingspan is renowned among plasterboard suppliers for it’s superbly insulated thermal plasterboard sheets. Alternative lining boards, such as fibre cement sheets, can also be bonded to the insulation core to create customised finishes and facings in our Kingspan Kooltherm K17 + Insulated Lining Board range. \u003ch2\u003eK17 Plasterboard Features\u003c\/h2\u003e \u003cul\u003e \t\u003cli\u003eAustralian Made\u003c\/li\u003e \t\u003cli\u003eCodeMark certified for NCC compliance\u003c\/li\u003e \t\u003cli\u003eNCC and AS\/NZS 4859.1:2018 compliant\u003c\/li\u003e \t\u003cli\u003eGlobal GreenTag GreenRate-certified\u003c\/li\u003e \t\u003cli\u003eAlso used for residential \u0026amp; modular construction\u003c\/li\u003e \t\u003cli\u003eFire-free, closed cell insulation core\u003c\/li\u003e \t\u003cli\u003e3-in-1 insulation, dry lining and vapour control\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eProduct Description and Durability\u003c\/h2\u003e If correctly applied, Kingspan Kooltherm® products can be expected to have a long life of service. Their durability depends on the supporting structure and the conditions of its use. Kingspan Kooltherm® products are warranted for a period of 10 years for both residential and commercial installations. This is subject to the terms of the complete Kingspan Kooltherm® warranty document. Kingspan Kooltherm K17 Insulated Plasterboard has a gypsum plasterboard face. It should, therefore, not be used to isolate dampness nor be used in continuously damp or humid conditions. This product can be applied utilising a variety of traditional or modern dry-lining techniques, to dry and structurally sound walls. These include the construction adhesive bonding method. The particular system employed will depend on the construction or design of the wall to which Kingspan Kooltherm K17 Insulated Plasterboard is to be fixed. If an acceptable adhesive bond cannot be achieved due to the wall surface, consideration should be given to a mechanically fixed option. The tapered edge to the plasterboard enables a flat seamless surface equal to traditional plaster finishes after the correct jointing procedures as per plasterboard manufacturer’s recommendation have been completed. \u003ch2\u003eConstruction Adhesive Bonding\u003c\/h2\u003e This method is for application to brick, block or concrete masonry cavity walls which are free from moisture penetration. \u003col\u003e \t\u003cli\u003eEnsure that the wall surface to be bonded to is free from oil, grease, paint, release agent, or any contaminate that may affect the bond of the adhesive to the wall.\u003c\/li\u003e \t\u003cli\u003eGun apply a continuous blob of construction adhesive around perimeter wall and ceiling junctions, and around any openings, such as windows and doors, in order to provide a seal.\u003c\/li\u003e \t\u003cli\u003eGun apply blobs of construction adhesive to the wall or the back of the board approximately 25 mm in diameter (single squeeze), at 300 mm centres in both directions or to specific adhesive manufacturer’s instructions. Ensure that the blobs adjacent to a board joint are approximately 25 mm in from the edge to avoid bridging the joint.\u003c\/li\u003e \t\u003cli\u003eTap the board back firmly using a straightedge, ensuring that the vertical edge is plumb.\u003c\/li\u003e \t\u003cli\u003eContinue dry lining in the same manner.\u003c\/li\u003e \t\u003cli\u003eProvide temporary mechanical support to the Kingspan Kooltherm K17 Insulated Plasterboard for at least 24 hours.\u003c\/li\u003e \t\u003cli\u003eMechanical fixings are recommended to complement the adhesive bond. Apply 2 per board after the adhesive has set, positioned 15 mm in from the board edge and at mid height with a nominal 25 mm embedment into the wall. (Refer to fixing manufacturer instructions for more information).\u003c\/li\u003e \t\u003cli\u003eIt is recommended that mechanical fixings are positioned in the tapered edge of the boards so that they are covered when the board is finished, (e.g. joints taped and skim coating) at mid height. Boards should be fitted tight to the ceiling\/joists\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eHandling, Storage and Installation of Insulation Panels\u003c\/h2\u003e The packaging of Kingspan Kooltherm® should not be considered adequate for long term outdoor protection. Ideally boards should be stored inside a building. If, however, outdoor storage cannot be avoided then the boards should be stacked clear of the ground and covered with an opaque polythene sheet or weatherproof tarpaulin. Boards that have been allowed to get wet should not be used. The insulation core is resistant to short–term contact with petrol and with most dilute acids, alkalis and mineral oils. However, it is recommended that any spills be cleaned off fully before the boards are installed. Ensure that safe methods of cleaning are used, as recommended by suppliers of the spilt liquid. The insulation core is not resistant to some solvent-based adhesive systems, particularly those containing methyl ethyl ketone. Adhesives containing such solvents should not be used in association with this product. Damaged boards or boards that have been in contact with harsh solvents or acids should not be used. Kingspan panels are chemically inert and safe to use. Cutting should be carried out either by using a fine toothed saw, or by using a sharp knife to cut through the insulation and paper backing of the plasterboard, then snapping the board face down over a straight edge and cutting the paper facing of the plasterboard on the other side. Ensure accurate trimming to achieve close butting joints and continuity of insulation.  \u003cdiv id=\"aircall-extension-app\"\u003e\u003c\/div\u003e","brand":"Kingspan","offers":[{"title":"Victoria \/ 35mm","offer_id":58071388160332,"sku":"PWV-K17035","price":2172.41,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 40mm","offer_id":58071388193100,"sku":"PWV-K17040","price":1957.79,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 50mm","offer_id":58071388225868,"sku":"PWV-K17050","price":1739.32,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 35mm","offer_id":58071388258636,"sku":"PWN-K17035","price":2389.65,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 40mm","offer_id":58071388291404,"sku":"PWN-K17040","price":2154.58,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 50mm","offer_id":58071388324172,"sku":"PWN-K17050","price":1913.25,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 35mm","offer_id":58071388356940,"sku":"PWQ-K17035","price":2400.54,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 40mm","offer_id":58071388389708,"sku":"PWQ-K17040","price":2164.06,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 50mm","offer_id":58071388422476,"sku":"PWQ-K17050","price":1921.52,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 35mm","offer_id":58071388455244,"sku":"PWA-K17035","price":2628.62,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 40mm","offer_id":58071388488012,"sku":"PWA-K17040","price":2369.98,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 50mm","offer_id":58071388520780,"sku":"PWA-K17050","price":2104.58,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/files\/1da8fdd7-kingspan-kooltherm-k17-insulated-plasterboard.jpg?v=1783940132"},{"product_id":"kingspan-kooltherm-k3-floorboard","title":"Kingspan Kooltherm K3 Underfloor Insulation","description":"\u003ch2\u003eKingspan Kooltherm K3 Underfloor Insulation\u003c\/h2\u003e \u003cdiv\u003e Kingspan Kooltherm® K3 Floorboard is a fibre-free rigid thermoset closed cell phenolic insulation core, sandwiched between two layers of tissue based facing adhesively bonded to the insulation core during manufacture. It can be used under concrete slabs and is ideal for both new build and renovation projects. \u003ch2\u003eK3 Floorboard Insulation - Key Benefits\u003c\/h2\u003e \u003cul\u003e \t\u003cli\u003eRigid thermoset phenolic insulation\u003c\/li\u003e \t\u003cli\u003eFibre-free, closed cell insulation core\u003c\/li\u003e \t\u003cli\u003eResistant to the passage of water vapour\u003c\/li\u003e \t\u003cli\u003eEasy to handle and install floor board insulation\u003c\/li\u003e \t\u003cli\u003eIdeal for new build and refurbishment\u003c\/li\u003e \t\u003cli\u003eSuitable as a concrete floor insulation\u003c\/li\u003e \t\u003cli\u003eCompliant with NCC and AS\/NZS 4859.1:2018\u003c\/li\u003e \t\u003cli\u003eCodeMark certified\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eInsulation for Concrete Floors and Suspended Ground Floors\u003c\/h2\u003e Did you know you can lose up to 10% of your heat through your floor? Installing \u003ca href=\"\/collections\/underfloor-insulation\"\u003eunderfloor insulation\u003c\/a\u003e at the ground level of your house can vastly reduce heat loss and create a more comfortable floor temperature for you and your family to walk on. Depending if your floor in you home is ground bearing or a suspended floor installation of insulation can vary. For new and existing homes with suspended timbers floors which can’t be accessed from below the floorboards can be removed from above to allow for insulating under floorboards with \u003ca href=\"https:\/\/www.kingspan.com\/au\/en\/products\/insulation\/floor-insulation\/kooltherm-k3-underfloor-board\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKooltherm K3\u003c\/a\u003e Floorboard between each floor joist. Kingspan Kooltherm K3 Floorboard is a rigid thermoset phenolic insulation board for use with solid concrete and suspended ground floors and can be placed directly onto concrete floors. Before the existing floorboards are reinstated a fully sealed vapour control layer is installed above the floor joists, below the floorboards thus making the floor vapour tight and airtight. At all times adequate and unobstructed ventilation must be maintained to the underside of the suspended timber floor joists. For new houses with which have a solid ground bearing concrete floor construction, a continuous damp-proof membrane\/radon barrier is required beneath the insulation or below the structural floor slab, taking care to overlap with any damp-proof course in the external walls. Then the Kingspan Kooltherm K3 Floorboard can be placed directly onto the damp proof membrane or concrete floor slab. The Kooltherm K3 Floorboard is then overlaid with a  damp-proof membrane before the installation of the floor screed. \u003ch2\u003eWhy Use K3 Floor Slab Insulation in New Constructions?\u003c\/h2\u003e \u003cul\u003e \t\u003cli\u003eIt reduces heat loss through the floor\u003c\/li\u003e \t\u003cli\u003eMinimises \u003ca href=\"\/blogs\/blog\/thermal-bridging-mean\"\u003ethermal bridging\u003c\/a\u003e\n\u003c\/li\u003e \t\u003cli\u003eMakes the concrete floor part of the thermal mass of the conditioned space, thereby reducing interior temperature swings.\u003c\/li\u003e \t\u003cli\u003eMakes your home feel more comfortable and easier to heat\u003c\/li\u003e \t\u003cli\u003eMade in Australia\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003cdiv\u003e \u003ch2\u003eWhat are the Benefits of Kooltherm K3 in Existing Constructions?\u003c\/h2\u003e •    Will reduce heat loss •    Help towards reducing energy costs •    Reduce draughts due to the installation of a vapour control layer. •    Make your home feel more comfortable and easier to heat. \u003c\/div\u003e \u003ch2\u003eHow to Install Kingspan Kooltherm K3\u003c\/h2\u003e\u003cdiv style=\"position:relative;padding-top:56.25%;margin:14px 0;border-radius:8px;overflow:hidden;background:#000;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/CX1hZj_HPoA\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" allowfullscreen loading=\"lazy\" title=\"How to Install Kingspan Kooltherm K3\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Kingspan","offers":[{"title":"Victoria \/ 50mm (6 boards)","offer_id":58071389372748,"sku":"PWV-K3050","price":662.18,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 25mm (12 boards)","offer_id":58071389405516,"sku":"PWV-K3025","price":927.87,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 25mm (12 boards)","offer_id":58071389438284,"sku":"PWN-K3025","price":1002.1,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 50mm (6 boards)","offer_id":58071389471052,"sku":"PWN-K3050","price":713.92,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 25mm (12 boards)","offer_id":58071389503820,"sku":"PWQ-K3025","price":1081.03,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 50mm (6 boards)","offer_id":58071389536588,"sku":"PWQ-K3050","price":771.46,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 25mm (12 boards)","offer_id":58071389569356,"sku":"PWA-K3025","price":1102.31,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 50mm (6 boards)","offer_id":58071389602124,"sku":"PWA-K3050","price":785.31,"currency_code":"AUD","in_stock":true},{"title":"South Australia \/ 25mm (12 boards)","offer_id":58071389634892,"sku":"PWS-K3025","price":0.0,"currency_code":"AUD","in_stock":true},{"title":"South Australia \/ 50mm (6 boards)","offer_id":58071389667660,"sku":"PWS-K3050","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/files\/b752b562-kingspan-kooltherm-k3-floor-board.jpg?v=1783940136"},{"product_id":"kingspan-kooltherm-k10-soffit-board","title":"Kingspan Kooltherm K10 G2 Soffit Board","description":"\u003ch2\u003eKingspan Kooltherm K10 G2 Soffit Board\u003c\/h2\u003e K10 FM Soffit Board is a fibre-free rigid thermoset phenolic insulation core, sandwiched between an upper tissue-based facing and a lower facing of reflective aluminium foil adhesively bonded to the insulation core during manufacture. \u003ch2\u003eKooltherm K10 G2 Features\u003c\/h2\u003e \u003cul\u003e \t\u003cli\u003eAustralian made\u003c\/li\u003e \t\u003cli\u003eCodeMark-certified for NCC compliance\u003c\/li\u003e \t\u003cli\u003eNCC and AS\/NZS 4859.1:2018 compliant\u003c\/li\u003e \t\u003cli\u003eFibre-free, closed cell insulation core\u003c\/li\u003e \t\u003cli\u003eMaintains a clear cavity\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003e10 Year Product Warranty\u003c\/h2\u003e If correctly applied, Kingspan Kooltherm® products can be expected to have a long life of service. Their durability depends on the supporting structure and the conditions of its use, however products are warranted for a period of 10 years for both residential and commercial installations, subject to the terms of the complete Kingspan Kooltherm® warranty document which is available upon request or downloadable from \u003ca href=\"http:\/\/www.kingspaninsulation.com.au\/home.aspx\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ewww.kingspaninsulation.com.au\u003c\/a\u003e. \u003ch2\u003eConcrete Wall Installation (Clip\/Channel System)\u003c\/h2\u003e \u003col\u003e \t\u003cli\u003eInstall chosen furring channel clips at required spacing for plasterboard lining.\u003c\/li\u003e \t\u003cli\u003eFit Kingspan Kooltherm® over furring channel clips by pushing over the clips to abut the wall, and so that the wings of the clips penetrate the board. Care should be taken to avoid the foil facing of the Kingspan Kooltherm® separating from the insulation core by neatly trimming the foil face at the point where the furring channel clip penetrates the insulation.\u003c\/li\u003e \t\u003cli\u003eButt join boards of Kingspan Kooltherm® to provide a continuous insulation layer.\u003c\/li\u003e \t\u003cli\u003eInstall furring channels by clipping into channel clips. Furring channels should be tight against the face of the Kingspan Kooltherm®. Where furring channels are not tight to the insulation contact Kingspan Insulation Technical Service for further advice.\u003c\/li\u003e \t\u003cli\u003eInstall plasterboard lining.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eTaping, Cutting, Packaging, Storage and Handling\u003c\/h2\u003e It is considered best practice to tape joins of Kingspan Kooltherm® boards in this system with 48 mm wide reinforced aluminium foil tape. When taping a plastic squeegee or blade must be used to apply appropriate pressure to the tape. Surfaces must be dry and free from dust, oil or grease prior to taping. Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side. Ensure accurate trimming to achieve close-butting joints and continuity of insulation. According to quantity, the boards are supplied in packs, labelled and shrink-wrapped in polythene. The packaging of Kingspan Kooltherm® should not be considered adequate for long term outdoor protection. Ideally boards should be stored inside a building. If, however, outdoor storage cannot be avoided then the boards should be stacked clear of the ground and covered with an opaque polythene sheet or weatherproof tarpaulin. Boards that have been allowed to get wet should not be used.","brand":"Kingspan","offers":[{"title":"Victoria \/ 90mm","offer_id":58071391207756,"sku":"PWV-K1090","price":988.66,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 80mm","offer_id":58071391240524,"sku":"PWV-K1080","price":1126.88,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 60mm","offer_id":58071391273292,"sku":"PWV-K1060","price":1108.73,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 50mm","offer_id":58071391306060,"sku":"PWV-K1050","price":1148.35,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 40mm","offer_id":58071391338828,"sku":"PWV-K1040","price":1243.35,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 30mm","offer_id":58071391371596,"sku":"PWV-K1030","price":1338.33,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 25mm","offer_id":58071391404364,"sku":"PWV-K1025","price":1428.61,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 25mm","offer_id":58071391437132,"sku":"PWN-K1025","price":1428.61,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 30mm","offer_id":58071391469900,"sku":"PWN-K1030","price":1338.33,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 40mm","offer_id":58071391502668,"sku":"PWN-K1040","price":1243.35,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 50mm","offer_id":58071391535436,"sku":"PWN-K1050","price":1148.35,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 60mm","offer_id":58071391568204,"sku":"PWN-K1060","price":1108.73,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 70mm","offer_id":58071391600972,"sku":"PWN-K1070","price":1056.51,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 80mm","offer_id":58071391633740,"sku":"PWN-K1080","price":1126.88,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 90mm","offer_id":58071391666508,"sku":"PWN-K1090","price":988.66,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 45mm","offer_id":58071391699276,"sku":"PWN-K1045","price":1215.34,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 45mm","offer_id":58071391732044,"sku":"PWV-K1045","price":1215.34,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 25mm","offer_id":58071391764812,"sku":"PWQ-K1025","price":1664.4,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 30mm","offer_id":58071391797580,"sku":"PWQ-K1030","price":1559.22,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 40mm","offer_id":58071391830348,"sku":"PWQ-K1040","price":1448.55,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 45mm","offer_id":58071391863116,"sku":"PWQ-K1045","price":1414.64,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 50mm","offer_id":58071391895884,"sku":"PWQ-K1050","price":1337.89,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 60mm","offer_id":58071391928652,"sku":"PWQ-K1060","price":1291.72,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 70mm","offer_id":58071391961420,"sku":"PWQ-K1070","price":1230.87,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 80mm","offer_id":58071391994188,"sku":"PWQ-K1080","price":1312.87,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 90mm","offer_id":58071392026956,"sku":"PWQ-K1090","price":1151.85,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 25mm","offer_id":58071392059724,"sku":"PWA-K1025","price":1571.47,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 30mm","offer_id":58071392092492,"sku":"PWA-K1030","price":1472.17,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 40mm","offer_id":58071392125260,"sku":"PWA-K1040","price":1367.69,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 45mm","offer_id":58071392158028,"sku":"PWA-K1045","price":1336.88,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 50mm","offer_id":58071392190796,"sku":"PWA-K1050","price":1263.19,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 60mm","offer_id":58071392223564,"sku":"PWA-K1060","price":1219.61,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 70mm","offer_id":58071392256332,"sku":"PWA-K1070","price":1162.16,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 80mm","offer_id":58071392289100,"sku":"PWA-K1080","price":1239.57,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 90mm","offer_id":58071392321868,"sku":"PWA-K1090","price":1087.53,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/files\/a7ca92cd-kingspan-kooltherm-k10-fm-soffit-board-insulation.jpg?v=1783940137"},{"product_id":"kingspan-white-kooltherm-k10-board","title":"Kingspan Kooltherm K10 G2W White Soffit Board","description":"\u003ch2\u003eKingspan Kooltherm K10 G2W Soffit Board - White Foil Facing\u003c\/h2\u003e \u003cp class=\"FiftyFifty-title\"\u003e\u003ca href=\"\/collections\/kingspan-insulation\"\u003eKingspan\u003c\/a\u003e White Kooltherm K10 Soffit Board is a fibre-free rigid thermoset closed cell phenolic insulation core, sandwiched between an upper tissue-based facing and a lower facing of white aluminium foil adhesivley bonded to the insulation core during manufacture.\u003c\/p\u003e \u003ch2\u003eFeatures and Benefits of Kooltherm K10 G2W Insulation\u003c\/h2\u003e \u003cul\u003e \t\u003cli\u003eRigid thermoset phenolic insulation\u003c\/li\u003e \t\u003cli\u003eFibre-free, closed cell insulation core\u003c\/li\u003e \t\u003cli\u003eWhite finish\u003c\/li\u003e \t\u003cli\u003eResistant to water vapour\u003c\/li\u003e \t\u003cli\u003eCompliant with NCC and AS\/NZS 4859.1:2018\u003c\/li\u003e \t\u003cli\u003eCodeMark-certified for NCC compliance\u003c\/li\u003e \t\u003cli\u003eAvailable with FM Approval to FM 4880\u003c\/li\u003e \t\u003cli\u003eGroup 2 NCC fire classification\u003c\/li\u003e \t\u003cli\u003eMade in Australia\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eWhite-Faced Insulation for Concrete Soffits\u003c\/h2\u003e If correctly applied, Kooltherm products can be expected to have a long life of service. Their durability depends on the supporting structure and the conditions of its use. These products are warranted for a period of 10 years for both residential and commercial installations, subject to the terms of the complete Kingspan Kooltherm® warranty document. \u003ch2\u003eConcrete Wall Installation (Clip\/Channel System)\u003c\/h2\u003e \u003col\u003e \t\u003cli\u003eInstall chosen furring channel clips at required spacing for plasterboard lining.\u003c\/li\u003e \t\u003cli\u003eFit Kooltherm over furring channel clips by pushing over the clips to abut the wall, and so that the wings of the clips penetrate the board. Care should be taken to avoid the foil facing of the Kooltherm separating from the insulation core by neatly trimming the foil face at the point where the furring channel clip penetrates the insulation.\u003c\/li\u003e \t\u003cli\u003eButt join boards of Kooltherm to provide a continuous insulation layer.\u003c\/li\u003e \t\u003cli\u003eInstall furring channels by clipping into channel clips. Furring channels should be tight against the face of the Kingspan Kooltherm. Where furring channels are not tight to the insulation contact Kingspan Insulation Technical Service for further advice.\u003c\/li\u003e \t\u003cli\u003eInstall plasterboard lining.\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eTaping, Cutting, Packaging, Storage and Handling\u003c\/h2\u003e It is considered best practice to tape joins of Kingspan Kooltherm boards in this system with 48mm wide reinforced aluminum foil tape. When taping a plastic squeegee or blade must be used to apply appropriate pressure to the tape. Surfaces must be dry and free from dust, oil or grease prior to taping. Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side. Ensure accurate trimming to achieve close-butting joints and continuity of insulation. According to quantity, the boards are supplied in packs, labelled and shrink-wrapped in polythene. The packaging of Kingspan Kooltherm should not be considered adequate for long term outdoor protection. Ideally boards should be stored inside a building. If, however, outdoor storage cannot be avoided then the boards should be stacked clear of the ground and covered with an opaque polythene sheet or weatherproof tarpaulin. Boards that have been allowed to get wet should not be used.","brand":"Kingspan","offers":[{"title":"Victoria \/ 25mm","offer_id":58071390028108,"sku":"PWV-K1025W","price":1599.94,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 60mm","offer_id":58071390060876,"sku":"PWV-K1060W","price":1241.66,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 40mm","offer_id":58071390093644,"sku":"PWV-K1040W","price":1392.64,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 25mm","offer_id":58071390126412,"sku":"PWN-K1025W","price":1489.6,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 40mm","offer_id":58071390159180,"sku":"PWN-K1040W","price":1296.6,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 60mm","offer_id":58071390191948,"sku":"PWN-K1060W","price":1156.03,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 30mm","offer_id":58071390224716,"sku":"PWV-K1030W","price":1499.09,"currency_code":"AUD","in_stock":false},{"title":"Victoria \/ 45mm","offer_id":58071390257484,"sku":"PWV-K1045W","price":1359.82,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 50mm","offer_id":58071390290252,"sku":"PWV-K1050W","price":1286.29,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 70mm","offer_id":58071390323020,"sku":"PWV-K1070W","price":1183.6,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 80mm","offer_id":58071390355788,"sku":"PWV-K1080W","price":1262.24,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 100mm","offer_id":58071390388556,"sku":"PWV-K10100W","price":1183.6,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 30mm","offer_id":58071390421324,"sku":"PWN-K1030W","price":1395.71,"currency_code":"AUD","in_stock":false},{"title":"New South Wales \/ 45mm","offer_id":58071390454092,"sku":"PWN-K1045W","price":1266.04,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 50mm","offer_id":58071390486860,"sku":"PWN-K1050W","price":1197.58,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 70mm","offer_id":58071390519628,"sku":"PWN-K1070W","price":1101.5,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 80mm","offer_id":58071390552396,"sku":"PWN-K1080W","price":1175.18,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 100mm","offer_id":58071390585164,"sku":"PWN-K10100W","price":1101.97,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 25mm","offer_id":58071390617932,"sku":"PWQ-K1025W","price":1864.0,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 30mm","offer_id":58071390650700,"sku":"PWQ-K1030W","price":1746.52,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 40mm","offer_id":58071390683468,"sku":"PWQ-K1040W","price":1622.49,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 45mm","offer_id":58071390716236,"sku":"PWQ-K1045W","price":1584.24,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 50mm","offer_id":58071390749004,"sku":"PWQ-K1050W","price":1498.58,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 60mm","offer_id":58071390781772,"sku":"PWQ-K1060W","price":1446.6,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 70mm","offer_id":58071390814540,"sku":"PWQ-K1070W","price":1378.34,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 80mm","offer_id":58071390847308,"sku":"PWQ-K1080W","price":1470.56,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 100mm","offer_id":58071390880076,"sku":"PWQ-K10100W","price":1378.94,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 25mm","offer_id":58071390912844,"sku":"PWA-K1025W","price":1638.56,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 30mm","offer_id":58071390945612,"sku":"PWA-K1030W","price":1535.28,"currency_code":"AUD","in_stock":false},{"title":"Australian Capital Territory \/ 40mm","offer_id":58071390978380,"sku":"PWA-K1040W","price":1426.26,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 45mm","offer_id":58071391011148,"sku":"PWA-K1045W","price":1392.64,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 50mm","offer_id":58071391043916,"sku":"PWA-K1050W","price":1317.34,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 60mm","offer_id":58071391076684,"sku":"PWA-K1060W","price":1271.63,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 70mm","offer_id":58071391109452,"sku":"PWA-K1070W","price":1211.65,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 80mm","offer_id":58071391142220,"sku":"PWA-K1080W","price":1292.7,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 100mm","offer_id":58071391174988,"sku":"PWA-K10100W","price":1212.17,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/files\/ks-k10-white-soffit-board-2048.jpg?v=1790066872"},{"product_id":"kingspan-kooltherm-k8","title":"Kingspan Kooltherm K8 Cavity Board","description":"\u003ch2\u003eKingspan Kooltherm K8 Cavity Wall Insulation\u003c\/h2\u003e Kooltherm K8 Cavity Wall Insulation is a fibre-free rigid thermoset closed cell phenolic insulation core, sandwiched between two layers of reflective \u003ca href=\"\/blogs\/blog\/reflective-foil-insulation-work\"\u003efoil\u003c\/a\u003e adhesively bonded to the insulation core during manufacture. This reflective surface improves the \u003ca href=\"\/blogs\/blog\/is-polystyrene-a-good-insulator\"\u003ethermal resistance\u003c\/a\u003e of any cavity adjacent to the board. \u003ch2\u003eKey Benefits of K8 Cavity Wall Insulation\u003c\/h2\u003e \u003cul\u003e \t\u003cli\u003eRigid thermoset phenolic insulation\u003c\/li\u003e \t\u003cli\u003eFibre-free, closed cell insulation core\u003c\/li\u003e \t\u003cli\u003eClear cavity is maintained\u003c\/li\u003e \t\u003cli\u003eFoil facings significantly increase the thermal resistance of the cavity\u003c\/li\u003e \t\u003cli\u003eEasy to handle and install\u003c\/li\u003e \t\u003cli\u003eCompliant with NCC and AS\/NZS 4859.1.2018\u003c\/li\u003e \t\u003cli\u003eAustralian Made\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eInstallation Instructions for K8 Cavity Insulation\u003c\/h2\u003e \u003col\u003e \t\u003cli\u003eConstruct the inner leaf to at least an appropriate level to allow installation of \u003ca href=\"\/collections\/kingspan-insulation\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eKingspan\u003c\/a\u003e K8 Cavity Board to proceed.\u003c\/li\u003e \t\u003cli\u003eRemove excess mortar and mortar droppings from exposed edges of any installed insulation boards.\u003c\/li\u003e \t\u003cli\u003eInstall the K8 Cavity Board to the external face of the internal leaf and secure in place using the wall ties and retaining disc \/ clip.\u003c\/li\u003e \t\u003cli\u003eEnsure wall ties include a retaining disc \/ clip and that they are the double drip type, installed drip downward.\u003c\/li\u003e \t\u003cli\u003eThe outer leaf is then built up to the level of the top of the boards and the process is repeated.\u003c\/li\u003e \t\u003cli\u003eEnsure that a residual cavity of at least 40 mm is maintained in accordance with the moisture penetration provisions set out in the masonry structures standard AS 3700:2011 as called up in the NCC Volume 1, Section B1D4\u003c\/li\u003e \u003c\/ol\u003e \u003ch2\u003eCutting and Packaging\u003c\/h2\u003e Cutting should be carried out either by using a fine toothed saw, or by scoring with a sharp knife, snapping the board over a straight edge and then cutting the facing on the other side. Ensure accurate trimming to achieve close-butting joints and continuity of insulation. According to quantity, the boards are supplied in packs, labelled and shrink-wrapped in polythene. \u003ch2\u003eHandling and Storage\u003c\/h2\u003e The packaging of Kooltherm should not be considered adequate for long term outdoor protection. Ideally boards should be stored inside a building. If, however, outdoor storage cannot be avoided then the boards should be stacked clear of the ground and covered with an opaque polythene sheet or weatherproof tarpaulin. Boards that have been allowed to get wet should not be used. \u003ch2\u003eResistance to Solvents\u003c\/h2\u003e The insulation core is resistant to short–term contact with petrol and with most dilute acids, alkalis and mineral oils. However, it is recommended that any spills be cleaned off fully before the boards are installed. Ensure that safe methods of cleaning are used, as recommended by suppliers of the spilt liquid. The insulation core is not resistant to some solvent-based adhesive systems, particularly those containing methyl ethyl ketone. Adhesives containing such solvents should not be used in association with this product. Damaged boards or boards that have been in contact with harsh solvents or acids should not be used. \u003ch2\u003eKooltherm K8 Durability\u003c\/h2\u003e If correctly applied, Kingspan Kooltherm products can be expected to have a long life of service. Their durability depends on the supporting structure and the conditions of its use, however these products are warranted for a period of 10 years for both residential and commercial installations.** Subject to the terms of the complete Kingspan Kooltherm® warranty document which is available upon request or downloadable from www.kingspaninsulation.com.au.","brand":"Kingspan","offers":[{"title":"Victoria \/ 40mm (12 boards)","offer_id":58071392354636,"sku":"PWV-K8040","price":463.12,"currency_code":"AUD","in_stock":true},{"title":"Victoria \/ 25mm (20 boards)","offer_id":58071392387404,"sku":"PWV-K8025","price":616.12,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 25mm (20 boards)","offer_id":58071392420172,"sku":"PWN-K8025","price":616.12,"currency_code":"AUD","in_stock":true},{"title":"New South Wales \/ 40mm (12 boards)","offer_id":58071392452940,"sku":"PWN-K8040","price":463.12,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 25mm (20 boards)","offer_id":58071392485708,"sku":"PWQ-K8025","price":717.8,"currency_code":"AUD","in_stock":true},{"title":"Queensland \/ 40mm (12 boards)","offer_id":58071392518476,"sku":"PWQ-K8040","price":539.58,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 25mm (20 boards)","offer_id":58071392551244,"sku":"PWA-K8025","price":677.73,"currency_code":"AUD","in_stock":true},{"title":"Australian Capital Territory \/ 40mm (12 boards)","offer_id":58071392584012,"sku":"PWA-K8040","price":509.44,"currency_code":"AUD","in_stock":true},{"title":"South Australia \/ 25mm (20 boards)","offer_id":58071392616780,"sku":"PWS-K8025","price":0.0,"currency_code":"AUD","in_stock":true},{"title":"South Australia \/ 40mm (12 boards)","offer_id":58071392649548,"sku":"PWS-K8040","price":0.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/files\/ks-k8-cavity-board-2048.jpg?v=1790066891"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1073\/8070\/3564\/collections\/buy-kingspan-kooltherm-insulation-panels-online.jpg?v=1784022119","url":"https:\/\/pricewiseinsulation.com.au\/collections\/kooltherm.oembed","provider":"Pricewise Insulation","version":"1.0","type":"link"}