Kingspan Kooltherm K10 FM G2W Soffit Board – White Foil Facing
Kingspan White Kooltherm K10 Soffit Board is a super high performance, fibre-free rigid thermoset closed cell phenolic insulation core, sandwiched between an upper tissue-based facing and a lower facing of white aluminium foil autohesively bonded to the insulation core during manufacture.
Features and Benefits of Kooltherm K10 FM G2W Insulation
- Super high performance rigid thermoset phenolic insulation
- Fibre-free, closed cell insulation core
- White finish
- Resistant to water vapour
- Group 2 NCC fire classification determined in a full room ISO 9705 test in accordance with AS/NZS 5637
- No CFC or HCFC used in manufacture
- Has zero ODP and low GWP
- Made in Australia
White-Faced Insulation for Concrete Soffits
If correctly applied, Kooltherm products can be expected to have a long life of service.Their durability depends on the supporting structure and the conditions of its use.These products are warranted for a period of 10 years for both residential and commercial installations, subject to the terms of the complete Kingspan Kooltherm® warranty document which is available upon request or downloadable from www.kingspaninsulation.com.au.Concrete Wall Installation (Clip/Channel System)
- Install chosen furring channel clips at required spacing for plasterboard lining.
- Fit Kooltherm over furring channel clips by pushing over the clips to abut the wall, and so that the wings of the clips penetrate the board. Care should be taken to avoid the foil facing of the Kooltherm separating from the insulation core by neatly trimming the foil face at the point where the furring channel clip penetrates the insulation.
- Butt join boards of Kooltherm to provide a continuous insulation layer.
- Install furring channels by clipping into channel clips. Furring channels should be tight against the face of the Kingspan Kooltherm. Where furring channels are not tight to the insulation contact Kingspan Insulation Technical Service for further advice.
- Install plasterboard lining.