Black Friday SaleUp to 15% off big brands.Shop the sale →

Pro Clima Intello Plus Air Barrier Wrap

Location Victoria
Dimensions 50m x 1.5m
$679.27
per roll inc GST

We do not hold stock for your state. Tell us what you need and we will quote you on product and delivery.

4.9 from 590 Trustpilot reviews Delivery in 1 to 2 business days Secure checkout
  • Interior air barrier that still lets the structure breathe, controlling moisture and draughts
  • Intelligent vapour control that helps protect the build-up from condensation
Rather not install it yourself? See our installation service.
Prefer to order by phone? Call 1300 729 639
Complete your order

Pro Clima Intello Plus Air Barrier Wrap

Pro Clima Intello® Plus offers an intelligent approach to air barriers, coupled with advanced vapour control features. The humidity-sensitive function is achieved through a polyethylene copolymer layer, expertly laminated onto spun-bond polypropylene and further reinforced with a polypropylene mesh. This versatile solution finds applications in both wall and ceiling installations, with installation guidelines emphasising that the plastic film (printed side) should be oriented towards the installer. It's crucial to shield Pro Clima Intello Plus from exposure to water and UV elements throughout the building's construction and operational phases.

Benefits of Intello Plus intelligent air barrier

  • Intelligent air barrier (IAB) for warm, dry, healthy buildings
  • Maximises thermal insulation performance
  • Highly diffusion resistant in winter
  • Excellent back diffusion capacity in summer

5 tips on installing Pro Clima

1
Technical data
BrandPro Clima
Vapour permeance classClass 2 to Class 3, humidity variable (AS 4200.1)
Vapour resistance (sd) and permeance0.25 to > 25m (EN ISO 12572); 0.8 to < 0.008 µg/N·s
Air barrierAir barrier (AS 4200.1); < 0.055m³/(m²·h·50 Pa) (EN 12114)
Flammability index< 5 (AS 1530.2)
Bushfire useUp to and including BAL-FZ (AS 3959)
UV exposureNot to be exposed to UV or water during construction or in service
Surface mass110 ± 20g/m² (EN 1849-2)
Service temperature-40°C to +80°C
Roll sizes
LengthWidthAreaWeight
50m1.50m75m²9kg
50m3.00m150m²18kg

Sizes sold here, as listed in the data sheet delivery form.

Walls

Summarised from the INTELLO Application Guide, Intelligent Air Barrier System (Version 2.0, April 2026). Work from the full guide: it has the drawings and every detail. Open the full guide (PDF)

1Prepare the site
  • Clean the area and check the inside face of the frame for staples, nails and protrusions that could damage the membrane.
  • Keep INTELLO PLUS away from water, moisture and direct UV, as it is for internal use only.
  • Use staples with an 8 to 10mm crown width and 8mm leg length.
2Mark the first course
  • Set a mark 1470mm above the floor in several places along the wall, which leaves a 30mm overlap onto the floor for the floor connection.
3Fix the bottom course
  • Align the top edge with the marks and fix one end with 5 to 6 staples at about 45°, stapling within the 30mm dashed line.
  • Pull the membrane taut and staple the other end, stretch the middle down into a tight V and staple, then pull the corners down and staple.
  • On metal frames, adhere the membrane with pro clima DUPLEX double-sided tape in the same V pattern.
4Add the next courses
  • Lap each upper course 100mm over the course below and staple it within the 30mm dashed line.
  • Pull each course taut and staple every 100mm along the top plate, the bottom plate and every stud.
5Tape the overlaps
  • Apply TESCON VANA along the 30mm dashed line, removing the release film as you work from one end to the other.
  • Run the PRESSFIX tool firmly along the tape to activate the adhesive, making sure there are no creases or excessive tension.
6Seal to the floor
  • Hold the overlap up and apply a bead of ORCON CLASSIC at least 5mm thick along the floor, then lay the membrane onto it without pressing the bead flat.
  • If an adhesion test with TESCON VANA fails on a clean surface, brush on TESCON PRIMER RP and apply the ORCON CLASSIC once the primer has dried, after approx. 15 to 20 min.
7Seal pipes, cables and sockets
  • Seal pipes with a ROFLEX grommet of the correct diameter and round cables with a KAFLEX grommet, pressing the flanges down with PRESSFIX.
  • Where cavity battens are not used for a service cavity, use an INSTAABOX for power points, sockets and switches.
Delivery & pickup
Delivery1 to 2 business days
Delivery costFrom $99 metro, priced by postcode
Delivery dateChoose yours in the cart
Warehouse pickupVIC, NSW, QLD, SA and ACT
Need it today?Ask us about same day delivery on 1300 729 639

We deliver to homes and building sites right across Australia. Choose your preferred delivery date at the online checkout and we'll confirm the same business day.

Full delivery & pickup info →
4.9 from 590 Trustpilot reviews

We collect verified reviews on Trustpilot across all our products and service.

Read all on Trustpilot →